INNOVV K2 Motorcycle Camera System was installed on 2017 Victory Magnum X1

I wanted to let you know that I received my new K2 system and have installed it on my 2017 Victory Magnum X1, and it is fantastic!
 The installation was a breeze!   When I opened the box everything was included, nothing missing, and you even included a card reader for the mini SIM card which I never even thought about until I saw it in the box. I used the mounting hardware you sent in the box and it worked great.  Glad that you improved the camera mount, and I appreciate that you included the rubber bushings to help dampen vibration. As soon as I got the system installed I powered up the bike and everything worked perfectly!  After the 10 second delay the K2 powered on, I easily connected to the K2 via WiFi from my iPhone, checked the settings, and viewed the video that the cameras were capturing.  I then viewed the video feed on my phone to finish fine-tuning the alignment of both of the cameras, and tightened everything up.  Total install time was about two hours, which included running both camera cables through the bike and securing everything. I went out for a “first ride” and when I got back I connected to the K2 to see how it worked.  I am very happy with the quality of the video and the ease of use of the K2 system and app, and am glad I selected the Innovv K2 out of the many different systems I compared prior to buying the K2. Thank you for a quality product that works as advertised, and is easy to install.  It’s great knowing that whenever I crank my bike and go for a ride I am capturing the ride on high quality video without having to do anything other than start the bike!  I’ve got peace of mind knowing that if something out of the ordinary happens I’ll have it on video, and I’ll also have video of the ride to enjoy, share, and use to improve riding habits and road strategy. I’ve included some photos of the finished installation, and will share some video through the iPhone App soon.                

INNOVV K1 Motorcycle camera installed on 2011 Victory Vision Tour

I have just finished the instillation of the K1 system on my 2011, Victory Vision Tour.  Had to swap the cameras around as the rear was too short for my bike.  Made a couple of new brackets to hold the cameras as mounting points are scarce on this beast!   I’m still adjusting the cable route on the rear camera as its picking up some interference when the engine is running.  Not a lot, the picture appears to “shimmy” but it doesn’t affect the overall view and stills taken from the video are not affected.   Haven’t found a convenient mounting point for the GPS module yet, so have left it off until I do.The DVR is kept in its pouch in the “glove box” as can be seen by the attached photos.  This allows easy access to remove the card if necessary and keeps the unit dry.   The power is taken from the auxiliary power socket (cigarette lighter socket) in the glove box (hard wired in), which is only “hot” when the ignition is on.  Also attached are photos of the location front and rear cameras.