INNOVV C5 Install On 2018 RZR1000

1. Remove dash cover. 2. Secure DC Adaptor.3. Run DC wires through fire wall, secure to the stock wiring. 4. Cut the red, yellow, and balck wires to length. 5. Place terminal ends on the wires.6. Connect wires. Yellow to key on power, Black to Ground, Red to permanant battery positive. 7. Mount DVR Mount, Predrill the holes with a one sixteenth drill bit.8. Run camera cable from camera location to the DVR. Connect DVR power to the DC Adaptor.

 9. Mount DVR.

10. Mount Camera, Set up DVR, Enjoy!   

INNOVV C5 Motorcycle Camera System was installed on DUCATI


Quoc Huynh installed INNOVV C5 Motorcycle Camera System on his Ducati.

Thanks for the sharing from Quoc Huynh and hope you will enjoy your riding life.


INNOVV C5 has the features as below:

1.Whole sets is waterproof.

2. Improved cable to avoid EMI.

3. Type C connector and two screws to fix the connection.

4. WiFi/App, easy to connect camera and mobile phone for setting, video review, and sharing. 



INNOVV C5 Motorcycle Camera System Was installed on Triumph Speed Triple R / Year: 2016

We received the installation share from Alvaro Machado who installed the INNOVV C5 Motorcycle Camera System on his Triumph Speed Triple R / Year:2016.  As for the installation processes, he shared that it was easy to install. In addition, he though its color was very good, the WIFI connection and camera mobile software were really nice.
Thanks for the share from Alvaro and hoping y’all enjoy your ride. The image of the INNOVV C5: The DVR:   Click the link for more specification of INNOVV C5 Motorcycle Camera System:     

Jimmy and his adventure

Jimmy installed INNOVV K1 on his Yamaha Super Tenere at August 2016, Jimmy also has a blog to share the video clips recorded by INNOVV K1 and shared the funny things meeting on the way,   Today’s jaunt is going to be a short one. We are expecting rain in the afternoon, so we just got together for a quick ride around the area. We only rode about 200 miles this morning – a short quarter day ride. More details, click, 


PS: I want to apologies now for my English. Please be cool.  First, I want to talk about the choice. After hours of search on the net, INNOVV K1 is the only system I find which answer the two important things for me. It has all the functionalities of a “DashCam”. Recording start with power on, stop on power off. It records on SD card, cycling, erasing older files. It records front and rear in the same time. And records also all GPS data. Nothing to mind about. Just install and forget, till you needs to check images. The second point is that cams are water resistant. That could seems nothing, but when you live in a country with tempered climate, it rains sometimes. So that’s critical for me.  THE BOXNothing to add about packaging. Everything is here, right protected. Maybe a little smooth cover on the top. But all I really fine.Instructions, guides for cables, Lens protections and stickers.Cams, DVR, GPS and Button. And also a micro USB adaptationPower unit, media cables, support and screws THE INSTALLATION OF THE FRONT CAMERA The harder is to find the right place. The place who discourage to steal the cam and gave the better view, without disturbing moto functions. Triple challenge ^^. On the HONDA CBF 1000 AA the harder was the front one. I thought first about fixing it under the front fairing. But it was really complicated with a real risk of crushing between the fairing and the wheel mud guard. Not enough place, see image below.  In some way of luck, cam just fit between the two headlights.So I decide to make a hole in the fairing. Anyway, the cam is totally protected and quit invisible.    INSTALLATION OF REAR CAMERA Very much easier. As I have all the place I need to fix it. The cam is screwed by the inside. And a second hole is made for the cable.My rear fairing is not the original one. But as you can see on pic below, even on the original one there are enough place to fit the cam.  GPS INSTALLATION The important thing for GPS is not to have much things that can jam the signal.As it is very light and not water resistant, I just stick it inside my rear fairing, on top, with stickers given in the box.  The recorder unit is no more water resistant. You have to put it in a dry place. Secure from water. You have also to think about taking and putting back the SD Card. So place to act with hands. And in the end, you have to see the screen, as you’ll need to for parameters. On CBF 1000 there is sadly no place to fit the recorder. So I decide to put it in place of the HONDA user’s manual. Under the passenger’s seat. Not really easy to access but you’re sure to keep it dry.  INSTALLATION OF POWER UNIT The little power unit should be close from DVR because the USB cable is short. The first thing to do is to locate a cable powered when you turn key on. You can do that easily with a volt meter. Once located, there is a way to connect avoiding problems, and to be sure the connection won’t cause electrical malfunctions.  First, instead of « cutting » the sheath, you should get it hot with something like a lighter. When soft enough, you just had to pull it with fingers to make the copper appear.  That will protect you from cutting it inadvertently.       Now spread the copper in two equal parts, making a hole. Put the cable you want to connect thru the hole and roll it around. Now you had to weld all that with tin. No misconducts. And finally just cover all with Chatterton or any other stick tape.                   For the connection with the battery, I advise to use the right pods, adapted to your system. Weld with tin also.  Still the problem of jam. There are much equipment’s in a moto that could jam the video signal. Recently I read one of your communication about a K1 user who adds some “Ferrite” to avoid the jamming problem.  Here it is. The install is finish for me because I won’t install the button as it is not water resistant but must be accessible. Not possible for me. Just had to ride and forgot it ^^. Thanks for reading and have a good trip !!. 

INNOVV K1 Motorcycle Recording System Review

 MCrider was founded by Kevin Morris, a Motorcycle Safety Foundation and Total Control certified instructor located in Dallas / Fort Worth, TX The mission of MCrider is simple: to help you become a better rider. You can learn more from blow video.   

INNOVV K1 Mounted on a 2012 Harley-Davidson FLHTK Ultra Limited

I purchased my K1 system back in December as a Christmas gift for myself.  Although I have a Garmin Virb X, I would often forget to charge it, take it with me, or even turn it on.  I wanted something that I didn’t have to worry about battery life or turning it off/on.  The INNOVV K1 fits the bill. First impression when I received the K1 was “Wow, it is packed very well”!! The instructions included were basic but usable.  The inclusion of an operations manual would have been nice, but the unit is still easy to use. I finally installed my system in late February 2017 as I was doing other work on the bike and it was the perfect time.  I had to figure out where I wanted to mount the cameras, GPS, and DVR.  I decided to try the ‘stealth’ route with the cameras.  The front camera is mounted on the bottom triple tree almost center of the bike. Although hidden, my concern is field of view.   I chose to mount the rear camera under the Tour Pak. I am still debating to move this camera or not.  My concern is it does sit back just a bit, so the Tour Pak cuts off the top field of view, although not by much.  If I do move this camera, I will try it on the top of the Tour Pak under the luggage rack.   For the GPS module and the control button, I borrowed Dave Steele’s ideas and mounted the GPS next to the fuse block.  The control button replaced the H-D headset receiver plug on the tank dash.  Mine was no longer useful as I had replaced the factory radio and removed the communication module.  Unfortunately, no pictures of the control button.  There was plenty of cable on the cameras, GPS module, and control button to run them under the tank, seat, and run them into the Tour Pak.  I tapped into the existing 12v switched power port supply for the DVR power.  I connected both the red constant and yellow switched leads together to the power port 12v positive lead. And black ground to the power port ground lead.  The DVR power block sits under the left rear run/stop light housing in the Tour Pak and is covered up nicely by the liner.  All the excess cables are also under the Tour Pak liner.  Unlike Dave, I choose to mount the DVR on the liner under the Tour Pak lid so there would not be any bending of the cables when opening/closing the lid. All in all, the installation took about 1-2 hours as I would test fit, run cables, then secure everything.  I am very happy with the results overall.  As mentioned previously, I will be moving the front camera for sure.  I am undecided to try it where Dave Steele located his (on front turn signal bar) or move it onto the inner fairing near the windshield (for full field of view).  I may try both temporarily and see which I prefer.  I will share my results when I do. Here is a link to my first ride with the system.  Please note I downgraded the video quality for uploading purposes. Video was created using Cyberlink Power Director 12.   

INNOVV K1 Traffic Camera installed on Harley Davidson CVO Ultra

I wanted to let you know I received INNOVV K1 and installed it on my Harley this weekend. I’m really impressed with the quality and features of the cameras and DVR unit. I attached a few pics so you can see how I installed it. I rode yesterday and it worked great, I will be sure to tell all my friends it’s an awesome product! The front camera, The rear camera DVR  The control button GPS I actually attached Velcro to the back of the DVR so it is firmly attached to the trunk lid. The model of my bike is a 2010 Harley Davidson CVO Ultra. I’ve done a lot of custom work on it and INNOVV K1 is a great addition! 

INNOVV K1 振動対策

INNOVV K1 振動対策その1 サポートから最初に提供された対策品。
(The cable fixing aluminum block to be provided first from support.The result is NG, it restarts simply by tilting or rocking lightly.)  INNOVV K1 振動対策その2サポートから提供された対策品、第2弾。
(The countermeasure provided by support, 2nd.I did not restart even if I rocked so much as I rocked.It reaches to the manufacturer’s wishes to get problem solved.) INNOVV K1 vs SONY HDR-AZ1 vs RICOH WG-M1