INNOVV K2 Motorcycle Camera System on Triumph Speedmaster 2018

This was a upgrade to the C5 that I had installed. I did not think that it could be improved on but it was. The K2 with two cameras was easy to fit all be it a bit tight to get it all in under the seat but it did fit. The bulkiest part was the excess wire but it did all go in beside the rear suspension spring. I have tried it on a run but as yet not downloaded the video . The product is the best on the market as far as I can tell and would not hesitate to recommend any product by Innovv.   

INNOVV C5 Motorcycle Camera was installed on Ducati Hypermotard.

I’ve recently installed the C5 on my Ducati Hypermotard. I’m very happy with this product, it meets all expectations as per the advertisement. The device app is very user friendly, the quality of footage is excellent and the technical support from the INNOVV team is outstanding! I highly recommend the C5 to all fellow riders.       

INNOVV C5 Install On 2018 RZR1000

1. Remove dash cover. 2. Secure DC Adaptor.3. Run DC wires through fire wall, secure to the stock wiring. 4. Cut the red, yellow, and balck wires to length. 5. Place terminal ends on the wires.6. Connect wires. Yellow to key on power, Black to Ground, Red to permanant battery positive. 7. Mount DVR Mount, Predrill the holes with a one sixteenth drill bit.8. Run camera cable from camera location to the DVR. Connect DVR power to the DC Adaptor.

 9. Mount DVR.

10. Mount Camera, Set up DVR, Enjoy!