INNOVV C5 Motorcycle Camera System was installed on DUCATI


Quoc Huynh installed INNOVV C5 Motorcycle Camera System on his Ducati.

Thanks for the sharing from Quoc Huynh and hope you will enjoy your riding life.


INNOVV C5 has the features as below:

1.Whole sets is waterproof.

2. Improved cable to avoid EMI.

3. Type C connector and two screws to fix the connection.

4. WiFi/App, easy to connect camera and mobile phone for setting, video review, and sharing. 



INNOVV C5 Motorcycle Camera installed on BMW R1200GS

Just a few pictures of an experimental lens mount for my INNOVV C5 motorcycle camera fitted to a BMW R1200GS. It might be of interest to others out there.   I have done a Google search for 25mm clamps and am going to experiment with one design I liked if it is successful. (The clip from INNOVV is on right, The right clip was made by Infinitly of Italy)      This is the camera in the new thicker mount, it is not as neat as the OEM version but is a lot sturdier and virtually unbreakable. I am hopping because of its thick construction it will reduce the vibration.   This is the slide view of the camera in the new thicker clip, the camera can be moved back and forth with slight effort, but needs a lot of effort to rotate it because of four thin ribs in the clip that clamp the camera and stop it rotating because of the vibration.  

INNOVV C5 Motorcycle Camera Installed on Suzuki hayabusa

Attached is some photos of the current INNOVV C5 motorcycle camera install and the rubber grommet I used.       I’ve also attached two photos from the old install on my Hayabusa.   On the new install, I cut one of your washers at an angle so the camera could be level although the fairing is at a slight angle and located this between the camera bracket and my softer washer/grommet.  Whilst this got rid of most the vibration caused by engine resonance, I now get camera shake caused by wind pressure at motorway speeds.  We definitely need a new solution as neither work.  If the lens is secured very tightly the original bracket works at speed provided engine revs are above or below the resonance level (<4500 or >5500 rpm).  My softer washers, nearly cure the engine resonance when stationary or at low speed, but allow the camera to move at speed (60+mph).

INNOVV C5 motorcycle camera installed on Indian Chief Dark Horse

 I attached photos of INNOVV C5 motorcycle camera install on my 2016 Indian Chief Dark horse. It was easy.  I put battery terminals on the red and black wires that crimp for easy install on the battery.   I attached the yellow wire to a grey/white adapter wire that was not being used.  Everything is stashed under the seat.   The camera is on the front fork, I did not use the included bracket, find a stock mount and attached it on the fork, and that is firm. Very easy install, and I like the design and the solid built quality.