3D printed mounts for INNOVV K1 motorcycle camera installing on 2015 VStrom 650

I live in Northern Virginia and roam the Shenandoah area as well as parts of WV and MD.   I originally installed the INNOVV K1 motorcycle camera system on my 2015 VStrom 650 on a front fork brace and off of the rear license plate.  Both vibrated too much for the images to be consistently clear.  In order to have a more stable, neat and fairly inconspicuous setup I designed mounts that were printed through www.3dhubs.com (I should have made them black though).   I used TinkerCAD to design the mounts and worked through someone on 3dhubs.com to have them printed.  They were around $8 – 10 each..  I had never designed anything 3d before, the web site is pretty intuitive and has tutorials. The front mount: https://tinkercad.com/things/1ITFS8SvnMB  The front camera is mounted on a bracket that is attached to an Over-the-dash GPS mount from Adventure Tech, LLC (great V-Strom products):  The Garmin GPS is not mounted on the RAM ball in these pictures.  I’ll be redesigning the front bracket, it’s too bulky as it is now.   The read mount: https://tinkercad.com/things/cB6oXvHrIAO     The DVR and GPS receiver are located under the seat.  This allows for easy access to the SD card.