1. Remove dash cover. 2. Secure DC Adaptor.3. Run DC wires through fire wall, secure to the stock wiring. 4. Cut the red, yellow, and balck wires to length. 5. Place terminal ends on the wires.6. Connect wires. Yellow to key on power, Black to Ground, Red to permanant battery positive. 7. Mount DVR Mount, Predrill the holes with a one sixteenth drill bit.8. Run camera cable from camera location to the DVR. Connect DVR power to the DC Adaptor.
I uploaded two new videos, done with C5 on the coil mount on the Tiger 800Xca on some country roads – one unpaved dirt, relatively pot-holed, and the other also unpaved, with more severe pot-holes and rough track…its not totally off-road yet (still a bit wet), but given the condition of the roads, the camera seems to work very well; appreciating that the suspension on the Tiger is very good overall.